SL-200 Product Questions

How long does the SL-200 take to charge?

When completely dead, ShredLights take 2 hours to recharge fully. The indicator light in the lens of the ShredLight will go from red to green when fully charged.

How long is the battery life of the SL-200?

White Lights: Low Power (25 hours), Medium Power (6 hours), High Power (3 hours), Slow Flash (48 hours), Fast Flash (12 hours), Burst Flash (40 hours).


Red Lights: Low Power (50 hours), Medium Power (20 hours), High Power (10 hours), Slow Flash (150 hours), Fast Flash (40 hours), Burst Flash (150 hours).

SL-1000 Product Questions

How long does the SL-1000 take to charge?

3.5 hours. The LED indicator will shine green when charged over 75%, orange when 25%-75%, and red when lower than 25%. This inidicator will light up with current battery level every time the light is turned on/off.

How long is the battery life of the SL-1000?

Constant Modes: 50 lumens - 50 hours / 250 lumens - 8 hours / 500 lumens - 4 hours / 750 lumens - 2.5 hours / 1000 lumens - 1.5 hours

Constant Burst: 50 lumens - 50 hours / 250 lumens - 8 hours / 500 lumens - 4 hours / 750 lumens - 2.5 hours / 1000 lumens - none

Slow Flash: 50 lumens - 250 hours / 250 lumens - 40 hours / 500 lumens - 20 hours / 750 lumens - 12.5 hours / 1000 lumens - 7.5 hours

Fast Flash: 50 lumens - 200 hours / 250 lumens - 32 hours / 500 lumens - 16 hours / 750 lumens - 10 hours / 1000 lumens - 6 hours

Burst Flash: 50 lumens - 250 hours / 250 lumens - 40 hours / 500 lumens - 20 hours / 750 lumens - 12.5 hours / 1000 lumens - 7.5 hours

What do the lens diffusers do and how do I use them?

The lens diffusers were created to change the angle of the shining beam. No diffusers will allow the light to shine the brightest and in the most concentrated beam. The medium diffuser will spread the light out the most, covering a larger area but less intensity of brightness. The narrow diffuser is in the middle of both options, allowing you to spread the beam while still maintaining brightness.

*Using the medium diffuser is the safest option to NOT blind oncoming traffic.*


To install a diffuser, first unscrew and remove the lens cap from the light. Place the diffuser onto the lens. Re-screw the lens cap back on.

Do the SL-1000's use the same mounts as the SL-200's?

Yes. The SL-1000 ShredLights utilize the same mounts as the SL-200 ShredLights. This means you can swap your lights between mounts with ease. This includes all skateboard mounts, action mounts, action clips, bar mounts, and sticky mounts.

Why does my SL-1000 top button blink orange instead of turning on?

This means you have enabled lockout mode. You can enable/disable lockout mode by holding both side buttons for 3 seconds. Lockout mode is intended for use when transporting your light, and when you want to ensure your light does not turn on accidentally.

Shipping Questions

How much does shipping cost?

Shipping cost varies depending on the shipping method chosen. You can estimate your shipping cost on the cart page.

How long does shipping take?

We ship orders within 1 - 2 calendar business days from the date of purchase and are sent via Australia Post. Orders can take 3-5 days to arrive depending on the region. WA, NT and Regional Areas should expect to see their parcel within 7 - 14 days.

Warranty Questions

What does the 90 day included warranty cover?

All ShredLights SL-200 lights have a 90-day limited warranty that covers any manufacturing defects, tears in the rubber casing or O-ring, and damage to the S-LOCK attachment mechanism. The warranty does not cover water damage; ShredLights are IP65 water resistant, not waterproof. Avoid severe exposure to water and always make sure the lights are dry before charging.

What is your return Policy?

We offer a 30-day money back guarantee on all orders. If you are not satisfied with your purchase, please contact us at to arrange a return.